Instructions Manual Split Type Room Air Conditioner

Instructions Manual Split Type Room Air Conditioner Average ratng: 4,6/5 402 votes

. OWNER S MANUAL Split Type Room Air Conditioner KSWM units Please read the operating instructions and safety precautions carefully and thoroughly before installing and operating your room air conditioner. CONTENTS SAFETY PRECAUTIONS.PARTS NAMES. OPERATING TEMPERATURE.MANUAL OPERATION.ADJUSTING AIR FLOW DIRECTION.HOW THE AIR CONDITIONER WORKS.OPTIMAL OPERATION.MAINTENANCE.

OPERATION TIPS.TROUBLESHOOTING TIPS. Read This Manual Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following indications. WARNING This symbol indicates the possibility of death or serious injury.

CAUTION When the air filter is to be Do not clean the air Ventilate the room well when removed, do not touch the conditioner with water. Used together with a stove, metal parts of the unit.

It may cause an injury. Water may enter the unit and An oxygen shortage may occur. PARTS NAMES INDOOR UNIT INDOOR UNIT Front panel frame Front panel Air inlet Air filter Horizontal air flow grille Vertical air flow louver Room temperature sensor Display panel Infrared signal receiver Air outlet Remote controller OUTDOOR UNIT Drain hose, refrigera nt connecting pipe Connective cable Air inlet Stop valve. OPERATING TEMPERATURE Mode Cooling operation Heating operation Drying operation Temperature 17 C Room temperature 0 C 3 0 C 17 C 32 C 18 C 11 C 4 3 C ( -5 C 43C:For the models with Outdoor temperature -7 C 21 C low temperature cooling system) (For special tropical.

ADJUSTING AIR FLOW DIRECTION Adjust the air flow direction properly otherwise, it might cause discomfort or cause uneven room temperatures. Adjust the horizontal louver using the remote controller. Adjust the vertical louver manually. Adjusting the Vertical Air Flow Direction (up - down) The air conditioner automatically adjusts the vertical air flow direction in accordance with the operating mode. HOW THE AIR CONDITIONER WORKS AUTOMATIC OPERATION When you set the air conditioner in AUTO mode, it will ECONOMIC (SLEEP) operation automatically select cooling, heating(cooling/heating models only), or fan only operation depending on what temperature you have selected and the room temperature. Temperature The air conditioner will control room temperature automatically round the temperature point set by you.

MAINTENANCE WARNING It is necessary to stop the air conditioner and dis- Household connect the power supply before cleaning. Drain Cleaner Cleaning the indoor unit and remote controller CAUTIONS Use a dry cloth to wipe the indoor unit and remote controller. A cloth dampened with cold water may be used on the indoor unit if it is very dirty. MAINTENANCE 4. Remove the air freshening filter from its support frame (The installation and removing method of the air freshening filter is different depending on the models, Air freshening filter see the pictures marked on the left.

Clean the air freshening filter at least once a month, and replace it every 4-5 months. OPERATION TIPS The following events may occur during normal operation. Protection of the air conditioner. Compressor protection The compressor can't restart for 3 minutes after it stops. Anti-cold air (Cooling and heating models only) The unit is designed not to blow cold air on HEAT mode, when the indoor heat exchanger is in one of the following three situations and the set temperature has not been reached. Dripping water may generate on the surface of the indoor unit when cooling in a high relatively humidity (relative humidity higher than 80%).

Adjust the horizontal louver to the maximum air outlet position and select HIGH fan speed. Heating mode (For cooling and heating models only) The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during heating operation. Troubleshooting tips Malfunctions and Solutions Stop the air conditioner immediately if one of the following faults occur.

Instructions

Disconnect the power and contact the nearest customer service center. OPERATION indicator or other indicators flash rapidly (5 times every second) and this flash can't be fixed by disconnecting the power, and then connect it in again.

Best Split Type Air Conditioner

Trouble Fuse blows frequently or circuit breaker trips frequently.

Posted :