Ducati 796 Owners Manual
Ducati Hypermotard 796 Service Manual
Beam setting: To check the headlight aim, place the motorcycle upright with the tires inflated to the correct pressure and one person sitting astride the motorcycle. The motorcycle should be perfectly vertical, with its longitudinal axis at right angles to a wall or screen at a distance of 10 meters. Draw a horizontal line corresponding to the center of the headlamp and a vertical one in line with the longitudinal axis of motorcycle. If possible, perform this check in dim light. Switch on the low beam.
The height of the upper limit between the dark area and the lit area must not be more than nine tenths of the height of the center of the headlight from the ground. Tyres: Front tire pressure: 225 kPa - 32.63 PSI (2.25 bar - 2.29 kg/cm2). Rear tire pressure: 250 kPa - 30.46 PSI (2.50 bar - 2.55 kg/cm2).
Because tire pressure is affected by temperature and altitude variations, you are advised to check and adjust it whenever you are riding in areas where ample variations in temperature or altitude occur. REPAIRING OR REPLACING TIRES. In the event of a tiny puncture, tubeless tires will take a long time to deflate, as they tend to keep air inside. If you find the pressure low in one tire, check the tire for punctures.